Price to determine what is wrong with a firearm. This usually involves test firing, cleaning, inspecting, and test firing again. Once completed you will receive an estimate for the repair. Sometimes a good cleaning fixes the problem.
$75Safety Check. Inspect to make sure firearm is safe to fire. Check headspace and insure that all safeties function as intended. Check trigger pull for safe limit.
$75Field Strip, clean, oil, and assemble. This is an operator level cleaning done per the manufacturers recommendations.
$65Basic cleaning & Safety Check
$95Complete disassembly of major parts. Ultrasonic clean and oil bath all metal and polymer parts. Hand clean items that cannot be run through ultrasonic baths such as wooden stocks, grips, and some aluminum frames. Clean bore to bare metal. Insure all screws are properly torqued.
$150Zero scope using a sighting laser and a software created a sight in target for a designated load and zero distance. Includes printed ballistics curve.
$55Align rings, set eye relief, level scope, torque and lock tight screws. Bore sight to customer specified load and range and provide ballistic print out.
$105Inspect the bore of your barrel using shop borescope. The only way to really know what condition it's in. Do it a pickup or drop off.
$30Complete disassembly of major parts. Ultrasonic clean and oil bath all metal and polymer parts. Hand clean items that cannot be run through ultrasonic baths such as wooden stocks, grips, and some aluminum frames. Clean bore to bare metal. Insure all screws are properly torqued. Perform Safety inspection.
$175Engrave a receiver with customers name or trust to comply with NFA requirements.
$85Remove existing muzzle device (add $25 if it is pinned). Clean threads, time and thread lock new muzzle device to barrel. Drill a hole 0.50” into barrel, seat a 3/32” dia. pin and weld over top. Dress weld and touch up finish ($99 for a 1 business day turn around).
$89Pin Stock to make MA.Compliant. Price depends on the stock. Will discuss options including a tool required option. Price ranges from $45 to $150
$55Ultrasonic clean and oil bath bolt and carrier assembly. Remove all carbon and fouling. Grease lugs. Clean bore of all fouling. Rest of weapon wiped down and lubed as required.
$45Field strip to major components. Ultrasonic clean and oil bath of all parts including stocks. Remove all carbon and fouling from bolt, carrier and barrel extension. Grease lugs. Clean bore to bare metal and lube. Makes gun look like new!
$75Ultrasonic clean and inspect bolt. Clean and inspect gas port, gas block, and gas key. Replace and align gas tube. Replace gas rings with helical ring. Inspect gas key for alignment and tighten or re-stake as required.
$75Remove barrel from receiver. Single point cut threads on a lathe concentric to the BARREL, 0.600” to shoulder. Test fit muzzle device or thread protector if supplied. Add $50 to include a pin and weld to this service.
$150Thread barrel for muzzle brake and pin and weld a muzzle brake to barrel. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. $160-$260
$200Remove barrel from receiver. Single point cut threads on a lathe concentric to the BORE, 0.600” to shoulder. Test fit muzzle device or suppressor and gauge for alignment. Add $50 to include a pin and weld to this service.
$225Remove existing rail/handguard and barrel. Replace with customer furnished barrel, rail, gas block, or handguard.
$110Remove and reattached a Front Sight Base or gas block. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. Add $125 if drilling and cross pinning. $85 – $135
$85Remove existing rail/handguard and replace with customer furnished rail or handguard. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. $50-$200
$110Grind off lug and touch up finish for factory look.
$49Remove a muzzle device that has been pinned and welded to barrel.
$50Remove existing sights, clean dovetails, install new customer supplied sights using thread lock. Please wait 24 hrs. before firing weapon.
$49Field Strip Clean Oil & Assemble
$65Ultrasonic cleaning and oil bath. Bronze brush clean bore to bare metal.
$75Field strip and inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$75Field Strip Clean Oil and inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$95Ultrasonic cleaning and oil bath. Bronze brush clean bore to bare metal. Inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$99High polish all feeding components and surfaces. Test fire
$65Traditional gunsmith method Stone and polish sear and hammer notch to lighten and smooth trigger pull. Removes any creep or grittiness.
$150Field Strip Clean Oil & Assemble
$65Ultrasonic cleaning and oil bath all metal parts. Hand clean any wood or plastic parts. Bronze brush clean bore to bare metal.
$95Attach rings and scope. Thread lock and torque screws. Set eye relief, level, and laser bore sight.
$105Cost to drill and tap a single hole. $35 ea. additional hole.
$65Drill and tap up to (4) holes then mount a scope base or rail. Attach rings and scope. Thread lock and torque screws. Set eye relief, level, and laser bore sight. Additional cost may apply to hardened receivers or side mounting.
$250Measure head space using GO & NO GO gauges. $50 rental charge if I have to rent a gauge. I have all common sizes.
$65